Definition, Meaning & Anagrams | English word MPLS

---

Definitions of MPLS

1. Abbreviation of Minneapolis.

---

---

---

---

---

---

---

---

---

Examples of Using MPLS in a Sentence

• Multiprotocol Label Switching (MPLS) is a routing technique in telecommunications networks that directs data from one node to the next based on labels rather than network addresses.
• A pioneering user of IP-over-ATM networking, Sohonet has since moved away from ATM to using gigabit Ethernet, 10 Gigabit Ethernet and MPLS technologies, including the use of wavelength division multiplexing on backbone connections.
• Layer 2 Tunneling Protocol version 3 is an IETF standard related to L2TP that can be used as an alternative protocol to Multiprotocol Label Switching (MPLS) for encapsulation of multiprotocol Layer 2 communications traffic over IP networks.
• In the 1990s, with the advances of the Internet, leased lines were also used to connect customer premises to ISP point of presence whilst the following decade saw a convergence of the aforementioned services (frame relay, ATM, Internet for businesses) with the MPLS integrated offerings.
• While operation Lindbergh used the most expensive ATM fiber optics communication to ensure reliability and success of the first telesurgery, the follow on procedures in Canada used standard public internet which was provisioned with QOS using MPLS QOS-MPLS.
• A forwarding equivalence class (FEC) is a term used in Multiprotocol Label Switching (MPLS) to describe a set of packets with similar or identical characteristics which may be forwarded the same way; that is, they may be bound to the same MPLS label.
• A route distinguisher is an address qualifier used only within a single internet service provider's Multiprotocol Label Switching (MPLS) network.
• Essentially, it lets two endpoints feel as if they’re directly connected by a traditional wire (like a T1 line or Ethernet link), even though the data is actually traveling over a more complex network, such as an IP or MPLS (Multiprotocol Label Switching) network.
• In computer networking, per-hop behaviour (PHB) is a term used in differentiated services (DiffServ) or Multiprotocol Label Switching (MPLS).
• NetFlow version 9 can include all of these fields and can optionally include additional information such as Multiprotocol Label Switching (MPLS) labels and IPv6 addresses and ports,.
• TDM refers to a T1, E1, T3 or E3 signal, while the PSN is based either on IP or MPLS or on raw Ethernet.
• MPLS VPN is a family of methods for using Multiprotocol Label Switching (MPLS) to create virtual private networks (VPNs).
• Virtual Private LAN Service (VPLS) is a way to provide Ethernet-based multipoint to multipoint communication over IP or MPLS networks.
• RFC 5880 defines the BFD protocol, detecting MPLS LSP failure, using BFD to monitor connectivity across multiple network hops, and using BFD for IPv4 and IPv6.
• Ethernet on the MAN can be used as pure Ethernet, Ethernet over SDH, Ethernet over Multiprotocol Label Switching (MPLS), or Ethernet over DWDM.
• There is also a percolating music scene, with musicians frequenting venues like The Cedar Cultural Center, The Cabooze, The Red Sea, Part Wolf MPLS, Acadia Cafe, and Palmer's Bar.
• Multiprotocol BGP is also widely deployed in case of MPLS L3 VPN, to exchange VPN labels learned for the routes from the customer sites over the MPLS network, in order to distinguish between different customer sites when the traffic from the other customer sites comes to the provider edge router (PE router) for routing.
• In 2007 BTC partnered with Cisco Networks to build a new Multiprotocol Label Switching (MPLS) backbone.
• Hootenanny was mostly recorded from October 1982 to January 1983 at the Stark/Mudge Mobile Unit warehouse in Brooklyn Center, Minnesota, which was described in the liner notes as "a warehouse in some godawful suburb north of Mpls".
• In networks based on MPLS or GMPLS, NNI is used for the interconnection of core provider routers (class 4 or higher).
• Internet providers who have an existing Layer 2 network (such as ATM or Frame Relay) may choose to use these VPNs instead of the other common MPLS VPN, Layer 3.
• Consequently, core networks are often designed with switches that use routing protocols such as Open Shortest Path First (OSPF) or Multiprotocol Label Switching (MPLS) for reliability and scalability, allowing edge routers to have redundant links to the core network.
• Specifically, the Internet uses a routing protocol called border gateway protocol (BGP), as do most Multiprotocol Label Switching (MPLS) networks.
• The native service may be ATM, Frame Relay, Ethernet, low-rate TDM, or SONET/SDH, while the PSN may be MPLS, IP (either IPv4 or IPv6), or L2TPv3.
• RSVP-TE generally allows the establishment of Multiprotocol Label Switching (MPLS) label-switched paths (LSPs), taking into consideration network constraint parameters such as available bandwidth and explicit hops.

Page preparation took: 395.95 ms.