Anagrammi & Informazioni su | Parola Inglese STEELS

---

---

---

---

---

---

---

---

Esempi di utilizzo di STEELS in una frase

• It is a transition metal with a multifaceted array of industrial alloy uses, particularly in stainless steels.
• Pattern welding was an outgrowth of laminated or piled steel, a similar technique used to combine steels of different carbon contents, providing a desired mix of hardness and toughness.
• Stainless steels, which are resistant to corrosion and oxidation, typically need an additional 11% chromium.
• Other major businesses of Solvay include the Frazer & Jones Company (Division of the Eastern Company), a foundry; Crucible Steel, producer of specialty steels; Iroquois China Company (Solvay China); Pass & Seymour, producing electrical wiring devices.
• Over time, the mills specialised and in Ramnäs the key product became iron chains – in modern days for the off-shore industry – and in Surahammar wheel-sets for the rail road industry and electro steels, both with ASEA as a major customer.
• The 200 and 300 series are generally austenitic stainless steels, whereas the 400 series are either ferritic or martensitic.
• During the Second World War Beeching, at the age of 29, was lent by Mond Nickel on the recommendation of Dr Sykes at Firth Brown Steels to the Ministry of Supply, where he worked in its Armament Design and Research Departments at Fort Halstead.
• The shear deformations that result produce a large number of dislocations, which is a primary strengthening mechanism of steels.
• While cementite is present in most steels and cast irons, it is produced as a raw material in the iron carbide process, which belongs to the family of alternative ironmaking technologies.
• Higher quality wrenches are typically made from chromium-vanadium alloy tool steels and are often drop-forged.
• Bainite is a plate-like microstructure that forms in steels at temperatures of 125–550 °C (depending on alloy content).
• Bulat became popular in cannon manufacturing, until the Bessemer process was able to make the same quality steels for far less money.
• These elements are intended to alter the microstructure of carbon steels, which is usually a ferrite-pearlite aggregate, to produce a very fine dispersion of alloy carbides in an almost pure ferrite matrix.
• These bands are formed by sheets of microscopic carbides within a tempered martensite or pearlite matrix in higher-carbon steel, or by ferrite and pearlite banding in lower-carbon steels.
• In 2011 Steels became fellow at the Institute for Research and Advanced Studies (ICREA) and research professor at the Universitat Pompeu Fabra (UPF) in Barcelona, embedded in the Evolutionary Biology Laboratory (IBE).
• However, it also had the useful feature that the hardness value divided by two gave the approximate UTS in ksi for steels.
• Until the 1990s, the family's main assets in India were a cold-rolling mill for sheet steels in Nagpur and an alloy steels plant near Pune.
• Likewise steels with higher carbon content (hypereutectoid steels) will form cementite before reaching the eutectoid point.
• Gate valves are typically constructed from cast iron, cast carbon steel, ductile iron, gunmetal, stainless steel, alloy steels, and forged steels.
• Iron, different steels, and even cast-iron can be welded to each other, provided that their carbon content is close enough that the welding ranges overlap.
• Harder steels take sharper edges, but are more brittle and hence chip more easily, whereas softer steels are tougher.
• SSAB Special Steels in Oxelösund is the only steelworks in Sweden to have its entire vertical production base in one place, from raw material handling to its rolling plates.
• In 1868, English metallurgist Robert Forester Mushet developed Mushet steel, considered the forerunner of modern high-speed steels.
• Tendons may consist of single wires, multi-wire strands or threaded bars that are most commonly made from high-tensile steels, carbon fiber or aramid fiber.
• Prior to the production of Borazon, diamond was the preferred abrasive used for grinding very hard superalloys but it could not be used effectively on steels because carbon tends to dissolve in iron at high temperatures.

La preparazione della pagina ha richiesto: 468,83 ms.