Synonyme & Anagramme | Englisch Wort LATHE

---

---

---

---

---

---

---

---

---

---

Beispiele für die Verwendung von LATHE in einem Satz

• The origin of the word turnip is uncertain, though it is hypothesised that it could be a compound of turn as in turned/rounded on a lathe and neep, derived from Latin napus, the word for the plant.
• Foucault was inspired by observing a thin flexible rod on the axis of a lathe, which vibrated in the same plane despite the rotation of the supporting frame of the lathe.
• Springfield has several nicknames—"The City of Firsts", due to the many innovations developed there, such as the first American dictionary, the first American gas-powered automobile, and the first machining lathe for interchangeable parts; "The City of Homes", due to its Victorian residential architecture; and "Hoop City", as basketball was invented in Springfield in 1891 by Canadian James Naismith.
• Phineas Pratt developed an ivory lathe and eventually Deep River became known as "the queen of the valley" due to wealth from the ivory industry.
• In 1836, the Pine Forest Lumber Company, which owned extensive tracts of rich timber land in the northern part of the county and in the southern portion of Luzerne County, established its headquarters in this growing community, and built new sawmills, a lathe machining facility and paling mills adjacent to the creek.
• Among the notable features of the area are: Mobius Arch, Lathe Arch, the Eye of Alabama and Whitney Portal Arch.
• The finishing stages consisted of cold-hammering to unevenly harden the metal, then turning on a lathe to reduce the thickness, and then often a final cold hammering.
• Performers sang or played into a large acoustic horn and the master recording was created by the direct transfer of acoustic energy from the diaphragm of the recording horn to the mastering lathe, typically located in an adjoining room.
• Its cut is analogous to that of a lathe, except that it is (archetypally) linear instead of helical.
• Armlets were manufactured from the shale using a lathe, which produced waste in the form of hard black discs; these have been discovered at several sites, and were thought by 18th-century antiquaries to be coins and therefore called 'coal money'.
• She composed series music for the TV Lab's weekly "VTR—Video and Television Review" and audio special effects for its 2-hour science fiction film The Lathe of Heaven, both under the direction of David Loxton.
• "Seamen, watermen and lightermen, coalheavers and shopkeepers, and ropemakers, coopers, carpenters and smiths, lived in small lathe and plaster or weatherboard houses, two storeys and a garret high, with one room on each floor"; the average rent was £2/7/0.
• He began a career as a turner, becoming an apprentice centre lathe turner in 1962, and later became works convenor for the Amalgamated Engineering Union at Beloit Walmsleys Ltd in Bolton.
• The first mention of Tenterden is within the Lathe of Scary, which covered part of the parish of Ebony and Reading Street: this appeared in 1241 when the town was recorded as one of the seven Hundreds located in the Weald.
• However the lathe court became anomalous as it fell between the hundredal courts below and the justices of the county (in petty and quarter sessions) above.
• With some accessories the former can be used as a shaper, a disk or drum sander, a grinder, a surface planer, a router, a horizontal boring machine and even as a power unit for a lathe; whereas a table saw's secondary uses are limited to shaper and disk sander.
• Unlike ordinary vinyl records, which are quickly formed from lumps of plastic by a mass-production molding process, a lacquer master or acetate (instantaneous record) is created by using a recording lathe to cut an audio-signal-modulated groove into its surface – a sequential operation requiring expensive, delicate equipment and expert skill for good results.
• Striking such large pieces of tough copper-nickel proved destructive to the Mint's dies, and Gasparro repeatedly used the Janvier reducing lathe to lower the relief to be used on the circulation strikes and the uncirculated silver clad coins.
• Interchangeability of parts was achieved by combining a number of innovations and improvements in machining operations and the invention of several machine tools, such as the slide rest lathe, screw-cutting lathe, turret lathe, milling machine and metal planer.
• These are the real workers, filmed at the Hamble Supermarine Factory, one being Wilfred Hillier (wearing spectacles), working on the only left handed lathe, imported from Germany.
• The two most common situations are that, within a machine tool such as a lathe or mill, a cutting tool is moved according to these instructions through a toolpath cutting away material to leave only the finished workpiece and/or an unfinished workpiece is precisely positioned in any of up to nine axes around the three dimensions relative to a toolpath and, either or both can move relative to each other.
• The ancient parish of Hawkhurst straddles the boundaries of four hundreds, including three that by 1295 were parts of the south of the Lathe of Scray in East Kent.
• The bore was bored out to proper size, the exterior was turned smooth, the trunnions were turned on a trunnion lathe, and a vent was drilled.
• Other industry are another metallurgical plant "Svobodny Sokol" ("Free Falcon"), a tractor factory LTZ, solvent-extraction plant Liboil (largest rapeseed oil producer in Central Federal District and the second in Russia), pipe factory, a factory for refrigerators and household appliances, an ice factory, lathe factory, chemical factories, etc.
• Items made on the lathe include tool handles, candlesticks, egg cups, knobs, lamps, rolling pins, cylindrical boxes, Christmas ornaments, bodkins, knitting needles, needle cases, thimbles, pens, chessmen, spinning tops; legs, spindles, and pegs for furniture; balusters and newel posts for architecture; baseball bats, hollow forms such as woodwind musical instruments, urns, sculptures; bowls, platters, and chair seats.

Die Seitenvorbereitung dauerte: 291,93 ms.