Definition, Meaning & Anagrams | English word RIVETED

---

Definitions of RIVETED

1. inflection of rivet

---

---

---

---

---

---

---

---

Examples of Using RIVETED in a Sentence

• The word "couplet" comes from the French word meaning "two pieces of iron riveted or hinged together".
• Few metal aircraft other than those with milled skins can strictly be regarded as pure monocoques, as they use a metal shell or sheeting reinforced with frames riveted to the skin, but most wooden aircraft are described as monocoques, even though they also incorporate frames.
• Adopting a cautious, economically driven approach they still riveted both the inner and outer hulls.
• Most modern bicycles have threaded holes in the frame to hold the bottle cage, often called braze-ons even though they may be welded, glued, riveted, or moulded into the frame material.
• The riveted construction was seen as a drawback, but since redrawing the blueprints for a welded construction was estimated to delay production by almost a year, no changes were made to the 116 m/41 ordered from Scania-Vabis in June 1941.
• The M3 was reliable, had considerable firepower, good armor, and high mobility but had serious drawbacks in its general design and shape, including a high silhouette, an archaic sponson mounting of the main gun preventing the tank from taking a hull-down position, and riveted construction.
• Our countrymen were too much riveted to the principles of the Linnaean school to appreciate the value of the natural system.
• On a 30 day pre-war training cruise in 1941, Narwhal lost 20,000 gallons of fuel oil due leakage from her riveted fuel tanks.
• Levi's jeans were first introduced to the East during the dude ranch craze of the 1930s, when vacationing Easterners returned home with tales (and usually examples) of the hard-wearing riveted denim pants.
• The Whirlpool Rapids Bridge, commonly known as the Whirlpool Bridge or the Lower Steel Arch Bridge (before 1937), is a spandrel braced, riveted, two-hinged arch bridge that crosses the Canada–United States border, connecting the commercial downtown districts of Niagara Falls, Ontario, and Niagara Falls, New York.
• ' Astonishment and awe for some moments rendered us mute, and, like statues, we stood fixed to the spot, with our eyes riveted on the abyss below.
• The parts for chests and covers are riveted together, ornaments and decorative figures are screwed on.
• Unlike many other vehicles of the time, the H35 was not made of riveted rolled homogenous armoured plates - rather, it was almost entirely cast iron.
• It has a Valmet RK 62 76 receiver, which is made from stamped and riveted sheet metal, constructed inside urethane stock.
• Their solution was to use a second skin to form a fairing riveted to the fuselage to smooth out the airflow behind the cooling flaps and multiple exhaust stubs of the new engine cowling.
• The interstage structure, oxidizer tank forward skirt, and inter-tank structure are all fabricated assemblies using riveted skin, stringers and frame.
• A square metal bracket is riveted on the rear, above the back brim, to secure the helmet to the knapsack while marching.
• Partly welded Group Three boats had riveted external ballast tanks; these were welded up before being sent to the Far East to prevent telltale oil leaks betraying the submarine's presence.
• Differences between the Fairlady ZG and an export-market Datsun 240Z include an extended fiberglass "aero-dyna" nose, wider over-fenders riveted to the body, a rear spoiler, acrylic glass headlight covers and fender-mounted rear-view mirrors.
• The fuselage is a semi-monocoque structure, with exterior skin sheets riveted to formers and longerons.
• " Bilge Ebiri of Vulture wrote: "Looking into Duvall's huge eyes from the front row of a theater, I found myself riveted by a very poignant form of fear.
• The well known Laurent Giles designed 46ft sailboat Beyond was built of riveted sheets of Birmabright and circumnavigated in the early 1950s by Tom and Ann Worth.
• The sabatons were the first piece of armour to be put on, and were made of riveted iron plates called lames.
• Unlike a number of other "new-build" projects the group building 82045 will equip the locomotive with a traditional riveted boiler complete with copper firebox.
• LMS advised a return to riveted construction due to doubts about the strength of the welds and rather than risk delays due to a lack of welders, this was accepted.

Page preparation took: 292.14 ms.