Anagrammen & Informatie over | Engels woord OLEDS

Voorbeelden van het gebruik van OLEDS in een zin

• Regular OLEDs are usually fabricated on a glass substrate, but by replacing glass with a flexible plastic such as polyethylene terephthalate (PET) among others, OLEDs can be made both bendable and lightweight.
• Phosphorescent organic light-emitting diodes (PHOLED) are a type of organic light-emitting diode (OLED) that use the principle of phosphorescence to obtain higher internal efficiencies than fluorescent OLEDs.
• Optoelectronic devices based on organic material, generally named OLEDs, need an encapsulation with low values of WVTR to guarantee the same performances over the lifetime of the device.
• Unlike LCDs, TFELs are much more rugged and can operate at temperatures from −60 to 105°C and unlike OLEDs, TFELs can operate for 100,000 hours without considerable burn-in, retaining about 85% of their initial brightness.
• Eikos aimed to replace indium tin oxide (ITO) and conducting polymers with carbon nanotube transparent conductors in several common electronic devices, such as touch screens, LCDs, OLEDs, photovoltaics, electroluminescent lamps, electronic paper.
• Diindenoperylene (DIP) is an organic semiconductor which receives attention because of its potential application in optoelectronics (solar cells, OLEDs) and electronics (RFID tags).
• The cathode ray tube was the workhorse of text and video display technology for several decades until being displaced by plasma, liquid crystal (LCD), and solid-state devices such as thin-film transistors (TFTs), LEDs and OLEDs.
• A plastic based AMOLED will be shatterproof, and will also be lighter and thinner compared to glass based OLEDs.
• Enhancing the performance and microlithography for TFTs is important for advancing LTPS active-matrix OLEDs.
• These materials can be doped in the emissive layer of multilayer, vapor-deposited OLEDs and generally show high stabilities and efficiencies.
• Amongst these materials, Fuchter has extensively evaluated the use of chiral small molecule additives (helicenes) to induce chiroptical properties into light emitting polymers for the realisation of chiral (circularly polarised, CP) OLEDs.

Paginavoorbereiding duurde: 284,95 ms.